Note: information on this page refers to Ceylon 1.2, not to the current release.

View source | Edit

Ceylon toolset configuration

The ceylon tools use a git-like configuration file format for configuring their behaviour.

Example configuration file 

# Put the cache on the huge disk
[repository "CACHE"]
url=/huge-disk/tom/ceylon/repocache

# Define the company repo
[repository "CompanyRepo"]
url=http://repo.example.com
password-alias=company-repo-password

# Append the company repo to the "remote"
[repositories]
global=/usr/local/ceylon/repo
remote=+CompanyRepo

# define a keystore to put my passwords in
[keystore]
file=/home/tom/toms-keys

# define a proxy for accessing the network
[proxy]
host=webproxy
port=8000
user=tom
password-alias=proxy-password

Configuration file location

There are several configuration files that can affect the configuration of the Ceylon tool chain. They go from least specific at the level of the system itself which affect all projects and all users to most specific at the level of a single project affecting only that project.

The first configuration file that gets read is the one at the system level which on Linux and Mac OS is /etc/ceylon/config and on (modern) Windows something like C:\ProgramData\ceylon\config.

After that comes the user's own configuration file which holds those values that only apply to that specific user. On Linux it is /home/<username>/.ceylon/config, on Mac OS it is /Users/<username>/.ceylon/config and on (modern) Windows it is something like C:\Users\<username>\.ceylon\config.

And finally comes the most specific configuration file which is located in a subfolder of the current working directory: .ceylon/config. This means it depends on where you are executing the ceylon command from! (When using an IDE the current working directory is the project folder itself)

Now in reality it's a bit more complex than this, because before reading that local file Ceylon will first see if a configuration file exists in the .ceylon folder of the parent folder of the current working directory. And before reading that one it will see if one exists in its parent folder etc etc all the way up to the root of the file system (it will ignore the user's and system configurtation files if it happens to encounter thme while traversing the file ssytem). This provides us with the possibility to set configuration options for a group of projects.

Configuration file structure

Basics

A configuration file consists of sections with key/value pairs and comments. A section consists of a name surrounded by square brackets:

[examplesection]

These names must start with a letter and for the rest can only contain letters and digits (and periods as we'll see later, but they are not part of the name).

We can also add comments, either on their own line or at the end of an existing line:

# A comment on its own line
[examplesection] # Another comment

Within sections we can define key/value pairs, each on their own line:

[examplesection]
some-setting=300

More about keys

Key names can only contain letters, digits and dashes. To unambiguously refer to a certain key in a certain section you can use the "complete name" which for the above setting is example-section.some-setting. Its value is 300. In this form all leading and trailing spaces and tabs are ignored (as are comments), so the following is exactly the same as the above:

[ example-section ]
some-setting  =  300 # Some comment

Key names and main section names can never contain spaces or tabs, but values can. In those cases that you need to specify leading or trailing spaces and tabs as part of the value you need to quote the value like this:

[example-section]
text=" An example text "

Spaces and tabs within the quotes are part of the value, any spaces and tabs outside them are ignored.

Sometimes it is necessary to specify values that span multiple lines, the easiest way to do that is like this:

[lines]
long-text-unquoted=A very\
very\
long line.
long-text-quoted= "Another very\
very\
long line."

And the final item on the topic of values are escapes, sometimes it's necessary to be able to specify special character that cannot (easily) be entered in another way:

[escapes]
escape1=\t # A single TAB character
escape2=\n # A single NEWLINE character
escape3="\"" # A double-quote character, so you can use them in quoted values
escape4=\\ # A single backslash, so you can use backslashes in values

NB: using escapes the above [lines] example could be rewritten like:

[lines]
long-text-unquoted=A very\nvery\nlong line.
long-text-quoted= "Another very\nvery\nlong line."

And that would be exactly the same. It's up to you to decide what you prefer.

More about sections

Now back to sections. For complex configurations it is possible to divide sections into sub-sections (and sub-sub-sections or sub-sub-sub-etc if necessary). This can be done in two different ways, either quoted or unquoted:

[examplesection "Sub section 1"]
some-setting=300

[examplesection "Sub section 2"]
some-setting=400

[examplesection.subsection1]
some-setting=100

[examplesection.subsection2]
some-setting=200

In the quoted version the name sub-section can contain almost any characters you want and is meant to give more human-friendly names, in the unquoted version the name of the sub-section must adhere to the same rules as for the main section name (starts with a letter and only letters and digits after that) and names are separated by a period.

Configuration file contents

[defaults] section

The [defaults] section is used to change the default behaviour of the ceylon tool chain. Recognised settings include:

  • encoding: The character set (e.g. UTF-8) to use when reading source files. If not specified the default file encoding for the platform is assumed.

  • offline: Prevents the tool chains from trying to download modules from remote repositories. Takes value yes, true (equivalent to yes), no or false (equivalent to no). Defaults to no (false).

  • timeout: The number of seconds to wait while connecting to a remote host before giving up. Platform specific default.

  • overrides: An file specifying module overrides.

[compiler] section

The [compiler] section is mainly used to change the default behaviour of the compile tool. The possible settings include:

  • source: Equivalent to supplying --source on the command line. It takes a path to a folder containing sources. Can be specified multiple times.

  • resource: Equivalent to supplying --resource on the command line. It takes a path to a folder containing resources. Can be specified multiple times.

Note: although it appears in the [compiler] section these settings actually affect any tools that take --source or --resource options. If a tool normally takes only a single of these options the first in the list will be used.

[runtool] section

[testtool] section

[repositories] section

Ceylon uses a set of local and remote repositories for its modules. The order and significance of the lookup (which is fixed) is:

  • system - Essential system modules
  • cache - A cache of modules that were previously downloaded from remote repositories
  • output - Where the compiler stores newly created modules
  • lookup - Other local repositories
  • global - Predefined user and system global repositories
  • remote - User defined remote repositories
  • other - Predefined remote repositories

The [repositories] section can be used to override the default values for those entries thereby changing or extending the lookup order. Take a look at the following example:

[repositories]
output=./output # Store new modules in the local `output` folder
cache=/huge-disk/tom/ceylon/repocache # Store the cached modules on a bigger disk
lookup=./modules
lookup=./extra-modules
lookup=/usr/local/ceylon/even-more-modules
remote=http://ceylon.example.com # An external site with Ceylon modules

First of all, the values for ouput and cache (as well as system, but you should normally never try overriding it) can only be specified once, while the others (lookup, global and remote) can be specified multiple times, Ceylon will try them one by one in the order you specify in this list.

NB: When we say "in the order you specify" we refer to the ones with the same key name, so if you add several remote repositories they will be tried in the order you specify, but you cannot change the main ordering: lookup repositories will always be tried before global, which will always be tried before remote.

Now looking at lookup we see that it's specified 3 times, but one of those lines contains a path to the local modules folder, which (as we will see later) is actually already part of the default lookup list. So why is it specified here again? Well, it is important to realize that in the configuration file we can only override existing values, we cannot change them or append to them, so when overriding a value like lookup without changing the default behaviour we must take care to include existing values.

The remote entry doesn't have any default value, so it can be easily used without having to worry about pre-existing values. It's specifically meant to add extra (normally remote) respositories that will be tried after all other options have been exhausted.

The other entry isn't mentioned in the above example because in general it is advisable to leave it alone, it contains a list of predefined repositories, among which is the main Ceylon repository itself that contains most of the interesting 3rd party modules. You should only need to override it if for some reason you do not want the default behaviour.

[repository] sections

So far when specifying respositories we have been using simple files system paths and HTTP URLs, but this might not be enough in certain cases. You might want to refer to a complex URL from the command line for example without having to type it each time. Or in the case of a remote output repository it might be necessary to authenticate before you will be allowed to push anything to that server.

For that porpose we can create a [repository] definition. Because all respository definitions are actually sub-sections of [repository] they require a name. An example could be:

[repository "CompanyRepo"]
url=http://ceylon.example.com
user=fubar
password=secret!

Supported properties include:

  • url - the URL of the repository. Besides remote URLs like http://repo.example.com and aether, this includes references to folders on the local file system, either absolute like /huge-disk/tom/ceylon/repocache or relative to the project folder like modules or ./my-modules. This property is required.
  • user - the user name if the repository requires authentication
  • password - the plain text password if the repository allows plain text authentication
  • password-alias - the name of an alias in a [keystore] which holds the password, an alternative to using the password property.
  • password-keystore - the name of the [keystore] which holds the password-alias, if not the default [keystore]

Using [repository] definitions like the above you can now refer to it from within the [repositories] section like this (pay attention to the + sign which is required):

[repositories]
remote=+CompanyRepo

You can now also refer to this repository from the command line, for example when pushing a compiled module to the secure company repository:

$ ceylon compile --out +CompanyRepo com.example.mymodule

There are a few built-in repository names, as follows:

SYSTEM repository

The system repository holds the modules necessary to use the ceylon tools, for example the compiler and language module. By default it is located in the repo directory of the ceylon installation.

[repository "SYSTEM"]
url=CEYLON_HOME/repo

CACHE repository

The cache repository contains all modules fetched from remote repositories, so they don't have to be downloaded each time they're needed. By default it is located in the .ceylon/cache folder located in the user's home directory.

[repository "CACHE"]
url=~/.ceylon/cache

LOCAL repository

The local repository is where modules are stored that are created by compiling local projects. By default it is specified as the folder modules relative to the current project folder.

[repository "LOCAL"]
url=./modules

USER repository

The user repository is where a user can store modules that will be available to them for execution regardless of the current folder the user runs the program. By default it is located in the .ceylon/repo folder located in the user's home directory. This can be overridden by setting the ceylon.config system property to point to the file that should be used.

 [repository "USER"]
url=~/.ceylon/repo

REMOTE repository

The remote repository points to the official Ceylon module repository ("The Herd") that contains all the official Ceylon SDK modules and all other freely available 3rd party modules. By default this is https://herd.ceylon-lang.org.

[repository "REMOTE"]
url=https://herd.ceylon-lang.org

MAVEN repository

The remote repository points to the official Maven module repository that contains so much of the Java eco system's finest contributions. By default this is aether:.

[repository "MAVEN"]
url=aether:

The [repositories] section revisited

This paragraph doesn't really contain any infomation necessary to be able to work with the Ceylon tool chain, but it might be interesting for completeness sake.

Looking at the above list we now have sufficient information to be able to know what the default [repositories] section would look like:

[repositories]
system=+SYSTEM
cache=+CACHE
output=+LOCAL
lookup=+LOCAL
global=+USER
other=+REMOTE
other=+MAVEN

This also means that if you define your own [repository] section with one of the above pre-defined names you will override the default location for that repository. (So in fact there are two ways of overriding pre-defined repositories)

[keystore] section

Although the config file supports specifying passwords in plain text, it also supports them being stored in external keystores. The default keystore is defined in the [keystore] section. Additional named [keystore]s can also be defined. Each keystore corresponds to a java.security.KeyStore.

Supported properties include:

  • file the name of a keystore file, for those keystores which are file based.
  • store-type - the KeyStore type. Default: jceks.
  • store-provider - the KeyStore provider. Default: SunJCE.

[proxy] section

The [proxy] section defines a HTTP proxy to use when accessing the network.

Supported properties include:

  • host - the hostname of the proxy server
  • port - the TCP port number of the proxy server. Default: 8080.
  • user - the proxy user name, if authenticating to the proxy is required
  • password - the proxy password, in plain text, or
  • password-alias - the alias of a [keystore] entry which holds the password, an alternative to using the password property
  • non-proxy-hosts - a host name which can be accessed directly, without going via the proxy.

Tools should use the OS's default proxy settings automatically. If you want the tools to not use any proxy, you can do us using an empty [proxy] section.